-
About us
Mount mat 400HP is a non-binder, needled polycrystalline fiber, non-intumescent, catalytic converter substrate support mat made of high Alumina polycrystalline wool (PCW) fiber needle blanket, showing high resiliency, excellent tensile strength, low thermal conductivity, outstanding erosion resistance and aging performance, the high temperature thermal stability even up to 1600°C.
Mount mat 400HP support mat is designed for the mounting of ultra-thin walled substrate catalytic converters including diesel oxidation catalysts (DOC), selective catalyst reduction (SCR), diesel particulate filters (DPF), gasoline particulate filters (GPF), underbody, close coupled, and manifold mount converters (gasoline, diesel and ethanol flex fuel), endcone Insulation, systems with isothermal or near isothermal temperature conditions.
Mount mat 400HP support mat is designed for the mounting of ultra-thin walled substrate catalytic converters including diesel oxidation catalysts (DOC), selective catalyst reduction (SCR), diesel particulate filters (DPF), gasoline particulate filters (GPF), underbody, close coupled, and manifold mount converters (gasoline, diesel and ethanol flex fuel), endcone Insulation, systems with isothermal or near isothermal temperature conditions.
Mount Mat 200HP as a sol-gel polycrystalline wool (PCW) fiber, low organic binder, non-intumescent, catalytic converter insulation support mat with low thermal conductivity, excellent fiber resilience, aging performance, erosion resistance, and long-term high temperatur performance ambition up to 1600°C based on high performance of polycrystalline mullite fiber is used in a wide range of gap designs, high temperature conditions and emission control device applications.
Mount Mat 200HP is designed of the mounting for catalytic converters with ultra-thin wall substrate including underbody, close coupled, and manifold mount converters, three way catalytic converter (TWC), gasoline particulate filters (GPF), diesel particulate filters (DPF), diesel oxidation catalysts (DOC), selective catalyst reduction (SCR), systems with isothermal or near isothermal temperature conditions.Compared with advanced needled polycrystalline wool blanekt sol-gel polycrystalline fiber support mat with lower cost but excellent performancewhich could reduce cost sharply.
Mount Mat 200HP is designed of the mounting for catalytic converters with ultra-thin wall substrate including underbody, close coupled, and manifold mount converters, three way catalytic converter (TWC), gasoline particulate filters (GPF), diesel particulate filters (DPF), diesel oxidation catalysts (DOC), selective catalyst reduction (SCR), systems with isothermal or near isothermal temperature conditions.Compared with advanced needled polycrystalline wool blanekt sol-gel polycrystalline fiber support mat with lower cost but excellent performancewhich could reduce cost sharply.
Mount Mat 200HPE automotive non-intumescent catalytic support mat made from high-alumina polycrystalline wool (PCW) fiber offer super erosion resistance allowing it for robust designs in the most demanding gasoline and diesel applications under all inlet gas conditions, and temperatures up to 1600°C. Mount Mat 200HPE with a low density organic scrim on one side through thermal press technique under high temperature which could make the mat dense state, thinner thickness, strong crack resistance and easily facilitate canning.
The unique handling characteristics and proven long-term ultra high performance offered by Mount Mat 200HPE make it the ideal solution for a wide range of emission control devices, including Diesel Oxidation Catalysts (DOC), Diesel Particulate Filters (DPF), Selective Catalyst Reduction (SCR), Gasoline Particulate Filters (GPF), Underbody Converters (gasoline, diesel and ethanol), Ultra Thin-wall Monoliths, Endcone Insulation.
The unique handling characteristics and proven long-term ultra high performance offered by Mount Mat 200HPE make it the ideal solution for a wide range of emission control devices, including Diesel Oxidation Catalysts (DOC), Diesel Particulate Filters (DPF), Selective Catalyst Reduction (SCR), Gasoline Particulate Filters (GPF), Underbody Converters (gasoline, diesel and ethanol), Ultra Thin-wall Monoliths, Endcone Insulation.
Mount Mat 1000HT is kind of cost-effective, non-intumescent, automative catalytic converter insulation support mat made from sol-gel refractory ceramic fiber which is thermally stable from low-temperature diesel systems up through 1250°C inlet gas temperature. Mount Mat 1000HT also offers excellent erosion resistance, allowing it to provide robust design solutions across a wide range of system inputs without the need of wire-mesh rings or any other type of edge-treatment.
Mount Mat 1000HT catalytic converter support mat is designed for a broad range of emission control devices, including diesel oxidation catalysts (DOC), diesel particulate filters (DPF), selective catalyst reduction units (SCR), gasoline particulate filters (GPF), underbody converters,and close coupled converters (gasoline, diesel and ethanol flex fuel). Compared with polycrystalline wool (PCW) fiber support mat, Mount Mat 1000HT also show excellent performance but cost-effective to reduce cost sharply for the emission control devices.
Mount Mat 1000HT catalytic converter support mat is designed for a broad range of emission control devices, including diesel oxidation catalysts (DOC), diesel particulate filters (DPF), selective catalyst reduction units (SCR), gasoline particulate filters (GPF), underbody converters,and close coupled converters (gasoline, diesel and ethanol flex fuel). Compared with polycrystalline wool (PCW) fiber support mat, Mount Mat 1000HT also show excellent performance but cost-effective to reduce cost sharply for the emission control devices.
Mount Mat 800NC as kind of flexible, less vermiculite, intumescent, catalytic converter substrate support mat made from Calcium Magnesium Silicate (AES) fiber conforming to the requirements of European laws as well as German workplace legislations is designed for improved resiliency, very good low temperature operating performance, and thermal stability with a continuous use temperature of 750°C.
Mount Mat 800NC catalytic converter support mat is designed for low to medium operating temperature applications including diesel particulate filters (DPFs), oxidation catalysts (DOCs) and selective catalytic reduction systems (SCRs) as well as gasoline oxidation catalysts, including ethanol (flex fuel) underbody converters.
Mount Mat 800NC catalytic converter support mat is designed for low to medium operating temperature applications including diesel particulate filters (DPFs), oxidation catalysts (DOCs) and selective catalytic reduction systems (SCRs) as well as gasoline oxidation catalysts, including ethanol (flex fuel) underbody converters.
Mount Mat 800 is a high performance, reduced binder, vermiculite, intumescent, automative catalytic converter support mat mount with very good low temperature operating performance, and retention performance over wide operating temperature range (cold to 950℃).
Mount Mat 800 is designed for low to high temperature systems, light duty and heavy-duty truck and off-road applications including diesel oxidation catalysts (DOCs), diesel particulate filters (DPFs), and selective catalytic reduction (SCRs), gasoline underbody applications, systems with isothermal or near isothermal temperature conditions etc.
Mount Mat 800 is designed to be a cost effective alternative to non-intumescent (polycrystalline fiber and ceramic fiber) catalytic converter support mats.
Mount Mat 800 is designed for low to high temperature systems, light duty and heavy-duty truck and off-road applications including diesel oxidation catalysts (DOCs), diesel particulate filters (DPFs), and selective catalytic reduction (SCRs), gasoline underbody applications, systems with isothermal or near isothermal temperature conditions etc.
Mount Mat 800 is designed to be a cost effective alternative to non-intumescent (polycrystalline fiber and ceramic fiber) catalytic converter support mats.
Mount Mat 550 is kind of vermiculite, intumescent, automative catalytic converter support mat made from moderate refractory ceramic fiber, moderate vermiculite with reduced peak holding force, overall reduced bulk density and improved low-temperature performance is designed to function as a mechanical support and exhaust gas seal for thin wall ceramic substrates.
Mount Mat 550 offers improved cold holding performance at substrate skin temperature below 300°C, while maintaining excellent thermal stability above 950°C. Mount Mat 550 also offers superior erosion resistance without the need for wire mesh ring protection (for erosion) or heat treatment for additional holding force at low temperatures.
Mount Mat 550 has been designed to provide robust performance for a wide range of exhaust aftertreatment including close-coupled converters, manifold-mounted converters, underbody converters (gasoline, diesel and ethanol flex fuel).
Mount Mat 550 offers improved cold holding performance at substrate skin temperature below 300°C, while maintaining excellent thermal stability above 950°C. Mount Mat 550 also offers superior erosion resistance without the need for wire mesh ring protection (for erosion) or heat treatment for additional holding force at low temperatures.
Mount Mat 550 has been designed to provide robust performance for a wide range of exhaust aftertreatment including close-coupled converters, manifold-mounted converters, underbody converters (gasoline, diesel and ethanol flex fuel).
Mount Mat 100 as kind of vermiculite, intumescent, catalytic converter support mat based on a small amout of refractory ceramic fiber and large amout of expanding vermiculite with high peak holding force is designed to function as mechanical support for the ceramic substrate and act as an exhaust gas seal while providing thermal insulation.
Mount Mat 100 offers improved cold holding performance at substrate skin temperature below 300°C, while maintaining excellent thermal stability with a continuous-use temperature of 750°C average mat temperature.
Mount Mat 100 is designed for typical catalytic converter applications including close-coupled converters, manifold-mounted converters, underbody converters (gasoline, diesel and ethanol flex fuel), endcone insulation for internally insulated converter designs.
Mount Mat 100 offers improved cold holding performance at substrate skin temperature below 300°C, while maintaining excellent thermal stability with a continuous-use temperature of 750°C average mat temperature.
Mount Mat 100 is designed for typical catalytic converter applications including close-coupled converters, manifold-mounted converters, underbody converters (gasoline, diesel and ethanol flex fuel), endcone insulation for internally insulated converter designs.
Shanghai East Best Emission Technology Co., Ltd.
F14,#757,Guangfu Road,Jingan District,Shanghai,China